CH1700 Side Mount | Seastar (Teleflex-Morse)

Search product:

Overview

This SeaStar Solutions Control provides both shift and throttle opera-tion for inboards, outboards, and inboard/outboards.

In addition to this control, the following components are required for a complete control system:

Two (2) control cables. Check section 2 of installation instructions

for routing and length. SeaStar Solutions Xtreme™ cables are recommended.

Features

NEUTRAL THROTTLE WARM-UP BUTTON – This feature provides a throttle only option to warm-up the engine before driving the boat. When the Control Hand Lever is in Neutral, push and hold the button at the base of the handle. While holding the button, move the lever forward to throttle up the engine. When you return the handle to the Neutral position, the button will reset automatically. Once the button resets, the hand lever will work both shift and throttle func-tions.
NEUTRAL INTERLOCK BUTTON – To prevent bumping the side mount control out of neutral, the button must be depressed and held to shift into for-ward or reverse (option on top mount).
ENGINE TRIM SWITCH – Used to move the engine UP or DOWN to level the boat while underway. This switch controls trim and tilt on most outboards.
TRAILER (TILT) SWITCH – Used to raise the engine for trailering the boat. This switch normally is used on I/O applications.
SIDE MOUNT EMERGENCY IGNITION INTERRUPT SWITCH – To work as a safety device, the lanyard clip must be attached to the emer-gency ignition interrupt switch and the lanyard itself must be secured to the boat operator. If the clip is pulled free of the control, the engine will shut down.

Common applications:

Marine

Product Codes

CH1700

CH7500

CH7600

Design & customisation options

We offer a wide range of configurable options to match your exact setup:

Cable length manufactured to customers requirement.

Need something tailored to your spec?

Prototyping & engineering support

We work with you from concept to completion, helping you replace legacy parts or develop custom systems.

Our engineers provide CAD-based configuration, prototyping, and testing to ensure your cable works perfectly the first time. We also offer push-and-pull testing as standard, with lifecycle testing available on request. For urgent projects, same-day or next-day turnaround can be arranged to keep your production schedules moving.

Services available:

CAD design, prototyping, push-and-pull testing, lifecycle testing (on request), plus same-day and next-day turnaround to support urgent marine, industrial, or specialist engineering projects.

Services available:

CAD design,
Prototyping,
Push-and-pull testing,
Lifecycle testing (on request),
Same-day and next-day turnaround to support urgent marine, industrial, or specialist engineering projects.

Industry Applications

Marine

Quick Downloads

Need something custom?
We offer bespoke
cable assemblies.

Get in touch

Have a question or need a custom solution? Fill out the form below and our expert team will get back to you with the answers and support you need to succeed.

Name

Company

Phone

Subject

Message

Upload a file

Would you like a call back?

Yes No

Preferred time

Acceptance

By checking this box you agree to the terms outlined in our privacy policy. *

Mandatory fields *